Audio
Frequency range:The lowest and the hightest frequencies that can be inputted/produced.
20 - 20000 Hz
Bridge-mode power output per channel (4 Ohm):
40 W
Bridge-mode power output per channel (8 Ohm):
40 W
RMS power output per channel (8 Ohm):
20 W
RMS power output per channel (4 Ohm):
20 W
Signal-to-Noise Ratio (SNR):This is the ratio of signal intensity to noise intensity.
80 dB
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
1%
Amplifier class:An electronic amplifier, amplifier, or (informally) amp is an electronic device that increases the power of a signal. It does this by taking energy from a power supply and controlling the output to match the input signal shape but with a larger amplitude. Power amplifier circuits (output stages) are classified as A, B, A/B and C for analog designs, and class D and E for switching designs based on the proportion of each input cycle (conduction angle), during which an amplifying device is passing current.
D
Audio output channels:An audio output channel is an electric circuit which acts as a path for a signal produced by a device. A device may have several audio output channels.
2.0 channels
Display
Built-in display:A display which is part of the product, so you do not need to attach another display.
Indication
Logistics data
Harmonized System (HS) code:
85184000
Packaging content
Packaging data
Package weight:Weight of the packaged product.
894 g
Package height:The distance from the top to the bottom of the packaging.
77 mm
Package depth:The distance from the front to the back of the packaging.
204 mm
Package width:The distance from one side of the packaging to the other.
267 mm
Ports & interfaces
DC-in jack:The socket/plug where the DC electricity supply connects to the device.
Headphone connectivity:How headphones connect to a device e.g. wirelessly or via a cable and connector.
3.5 mm
Headphone outputs:Number of sockets /ports where headphones are connected.
1
Speakers connectivity type:The type of connection used for the speakers e.g. RCA connector.
3.5mm
Power
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
110 - 220 V
Technical details
Material:The material from which a thing is or can be made e.g. wood, plastic.
Metal
Remote control type:
RS-232
Frequency band:A small section of the spectrum of radio communication frequencies, in which channels are usually used or set aside for the same purpose e.g.for a channel on FM radio; for mobile networks to communicate with mobile phones.
20 - 20000 GHz
Connectivity technology:
Wired
Purpose:What the product is used for.
Home
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
790 g
Height:The measurement of the product from head to foot or from base to top.
38 mm
Depth:The distance from the front to the back of something.
87 mm
Width:The measurement or extent of something from side to side.
96 mm
