Item added to your basket
Edifier M1360 speaker set 8.5 W PC Black 2.1 channels 4 W
G-forbes M1360 - 2.1, RMS 2W x2+4.5W, 150 - 20000Hz, 10KO, 3.5mm, 2.5kg, black
Quick Code: Q136256Part Code: M1360Edifier
Product Overview
Specification
Delivery & Returns
Technical Advice
This 2.1 multimedia speaker system is a practical audio solution for all multimedia applications. With upward angled satellites and a downward angled subwoofer, sound is channeled towards the user with a clear, even bass output. The wired remote allows for ease of volume control and the 3.5mm stereo input and RCA input easily connects to any host device.
- Wooden MDF enclosed, 4 inch subwoofer with front bass reflextion port;
- Uniquely designed downward angled subwoofer;
- Two compact, upward angled satellites;
- Magnetically-shielded satellites and subwoofer;
- Wired volume control with audio mute button;
- 3.5mm auxiliary input and RCA input.
Technical Description: M1360 - 2.1, RMS 2W x2+4.5W, 150 - 20000Hz, 10KO, 3.5mm, 2.5kg, black
Amplifier
Amplifier/receiver input interface type:
3.5 mm jack, RCA
Signal-to-Noise Ratio (SNR):This is the ratio of signal intensity to noise intensity.
85 dB
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
10%
Amplification device form factor:
Built-in
Amplification device type:
Amplifier
Amplification device included:The product has an amplification device, which is used to strengthen a signal(s).
Performance
Recommended usage:What the product should be used for, and how it should be used (e.g. ambient temperature).
PC
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
8.5 W
Audio output channels:An audio output channel is an electric circuit which acts as a path for a signal produced by a device. A device may have several audio output channels.
2.1 channels
Power
Power source:What is providing power for the product e.g. mains electricity.
AC
Satellite speakers
Satellite speaker dimensions (WxDxH):
64 x 112 x 140 mm
Satellite speaker impedance:
4 O
Satellite speaker frequency range:
150 - 20000 Hz
Satellite speakers RMS power:This is a measure of the continuous power (RMS power) produced by a satellite speaker.
4 W
Number of satellite speakers:The quantity of satellite speakers. These are speakers used in surround-sound systems that are intended to be placed around a center channel speaker, as a part of a technique to recreate "three-dimensional" immersive sound; they tend to be smaller than the center speaker, and often contain audio to the left, right, and behind of the center channel.
2
Subwoofer
Subwoofer dimensions (W x D x H):
158 x 252 x 225 mm
Bass reflex:Type of loudspeaker enclosure that uses the sound from the rear side of the diaphragm to increase the efficiency of the system at low frequencies as compared to a typical closed box loudspeaker or an infinite baffle mounting.
Subwoofer driver diameter (imperial):
10.2 cm (4")
Subwoofer frequency range:The range of frequencies (low-high sounds) produced by a subwoofer, which is a loudspeaker which produced bass sounds (low frequency).
20 - 170000 Hz
Subwoofer RMS power:This is a measure of the continuous power (RMS power) produced by a subwoofer.
4.5 W
Weight & dimensions
Delivery Options
3 Working Days £4.95
Next Working Day £7.95
More delivery info
M1360 Edifier
6923520262335 B003TWN6HU
M1360 - 2.1, RMS 2W x2+4.5W, 150 - 20000Hz, 10KO, 3.5mm, 2.5kg, black
£31.62 and
In stock
SKU: M1360